UL SMD3528 LED Strip 600 Single Color Chips, Damp Rated

Availability: In Stock

Product Code: ESP1V2-62-12

Available Options

* Required Fields


Quick Overview

- 600 LED Chips. UL Recognized.
- Comes with 3m adhesive tape on the back of the strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- Works with 12VDC. Power supply not included.
- Cut at every 3rd LED.


The LED strips are a flexible lighting solution for your lighting challenges for incredible indirect illumination. These strips are designed for interior and exterior use, to bend and twist in just about any direction imaginable. Our LED strips use surface mounted LEDs, which allows for incredible flexibility without causing any damage to the product. In addition, all strips come with 3m adhesive tape allowing them to stick to most surfaces. The strip includes a silicone cover that serves as a waterproof protection and will safely protect the strips if the product is placed in an exterior environment. The strip can be cut at every 3rd LED, and this feature allow you to obtain the right length of light for your application, and also to illuminate a challenging area where the lighting needed is not continuous. After cutting the strip, the remaining segment of the strips are still available by purchasing the connectors; check the LED strips accessories section. LED strips work with low voltage, 12VDC, making them suitable and safe for the above-mentioned interior lighting. The power supply is not included, please calculate the total charge and use before purchasing the power supply or consult a specialist. The ligting output of this product is high enough to create strong accent lights and to serve as general illumination as well. Since the quantity of LED chips is the highest among the current LED strips, it brings you two benefits. The first benefit is shorter cuttable lenghts and it gives you more possible specific lenghts for your customized lighting needs, and secondly it posseses a better light distribution because of its higher chip density.
Electrical Information
Input Voltage DC12V
Power Consumption 32W
Watts Per Foot 1.95W/ft
Dimmable YES
Dimmer Type DC12V


Lighting Characteristics
Luminous Flux 256 Lm/ft
Color Temperature Options 3000K & 6000K
Beam Angle 115
CRI >75


General Characteristics
Strip Length 5 meters / 16.4 feet
Chip Type SDM3528
LED Chips / Meter 120 LEDs/m
LED Chips / Foot 36 LEDs/ft
Segment Cut Every 1 inch
IP Rating IP65
Life Span 50,000 Hrs
Suitable for Wet location YES
Suitable for Damp location YES
UL Recognized YES
Warranty 1 Years

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

1.) Datasheet